Check The Number Of Wall Outlets - Fujitsu Eternus DX60 User Manual

Chapter 5 Installation
> 5.1 Installation Preparation
5.1.2

Check the Number of Wall Outlets

Check the required type and number of the wall outlets.
Type of wall outlet connectors
All ETERNUS DX60/DX80/DX90 device models include US spec. AC200-240V cables (with
plug) as standard.
In addition, power cords must comply with the particular safety standards of the country of use. In
some cases, a power cord will need to be purchased locally to satisfy the relevant power safety
requirements.
IMPORTANT
Table 5.1
Cable type
Controller
Enclosure
Drive Enclosure
AC200V outlet
box
(1U)
AC200V outlet
box
(2U)
Required Number of Power Outlets
The number of power outlets required will depend on the number of drive enclosures and AC out-
let boxes.
• AC Outlet Boxes Not Connected
Table 5.2
Controller
Enclosure
Drive Enclosure
No. of power outlets
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
When determining the rack-mounting layout, consider the interaction
between the position of each drive enclosure and AC outlet box in the rack
and the length of each cable.
For example, for something installed at the top of a 1,800mm rack, about
2m of cable will be required to reach the bottom of the rack.
Wall outlets and cable lengths
ETERNUS
DX60/DX80/
DX90 connector
IEC320 C13
Direct
connection
Required number of power outlets (when AC outlet boxes are not connected)
Component
1 1
0 1
2 4
Power outlet Cable
connector length
NEMA L6-15P 4m
NEMA L6-20P 4m
Combination pattern
1 1 1 1
2 3 4 5
6 8 10 12 14
87
Note
Max. rating: 250V
15A
(Normal usage
<12A)
Max. rating: 250V
20A
(Normal usage
<16A)
1 1 1 1
6 7 8 9
16 18 20
Copyright 2010 FUJITSU LIMITED