Fujitsu Eternus DX60 User Manual page 195

Chapter 8 Installing Optional Products
> 8.2 Drive Enclosure Installation
7
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Fix the drive enclosure in the rack.
3.5" type drive enclosure
Use the two thumb screws at the front of the drive enclosure to fasten it in the rack.
Thumb screw
2.5" type drive enclosure
• Use the thumb screw to fasten the front right of the drive enclosure to the rack.
• Do not fix the front left of the drive enclosure to the rack at this point.
After all work for addition has finished, attach the supplied flange cover, and use the
thumb screw to fasten the front left of the drive enclosure to the rack.
Thumb screw
(Rear rack pillars)
(Rear rack pillars)
195
Copyright 2010 FUJITSU LIMITED