Registering The Advanced Copy License Key; Figure 7.28 [Register Copy License] Screen; Figure 7.29 [Advanced Copy Status] Screen - Fujitsu Eternus DX60 User Manual

Chapter 7 Setup
> 7.3 Advanced Copy Setup
7.3.2

Registering the Advanced Copy License Key

Register the license key according the following procedure.
Procedure
1
1-1
1-2
1-3
1-4
2
2-1
2-2
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Register the Advanced Copy license key.
Start GUI.
Click the [Register Copy License] under the [Advanced Copy Management] menu on
the [Volume Settings] tab in the GUI screen.
The [Register Copy License] screen appears.
Input the obtained license key in the "License Key" field, and click the [Register Copy
License] button.

Figure 7.28 [Register Copy License] screen

A confirmation screen appears.
Click the [OK] button.
The Advanced Copy license is registered.
Check that the license key is registered.
Click the [Advanced Copy Status] menu on the [Status] tab of in the GUI screen.
The [Advanced Copy Status] screen appears.
Check that the "Advanced Copy License" is set to "Registered".

Figure 7.29 [Advanced Copy Status] screen

168
End of procedure
Copyright 2010 FUJITSU LIMITED