Initial Setup - Fujitsu Eternus DX60 User Manual

Chapter 7 Setup
> 7.2 Basic Setup
7.2.1

Initial Setup

Start Graphical User Interface (GUI) from the Web browser of the connected PC, and perform
the initial setup of the ETERNUS DX60/DX80/DX90 in the following order.
• Set Date and Time
• Set Storage System Name
• Change Password
• Modify FC Port Mode (Only for ETERNUS DX90)
• Set Port Parameters
• Setup Network Environment
The initial setup procedure is as follows: For the setup details, refer to "ETERNUS DX60/DX80/
DX90 Web GUI User Guide".
Refer
Procedure
1
1-1
1-2
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
"ETERNUS DX60/DX80/DX90 Web GUI User Guide"
Start the Initial Setup.
Start the Web browser on the PC.
Enter either of the following URLs in the address bar of the Web browser.
http://192.168.1.1/
or
https://192.168.1.1/
The logon screen of GUI appears.
140
Copyright 2010 FUJITSU LIMITED