MSI 975X Platinum Series User Manual page 41

2.Use the external cable to connect the two graphics cards. The cable is
attached from the CrossFire Ready graphics card's DVI connector to the CrossFire
Edition high density input connector (DMS). Then connectting a monitor to the left DVI
connector.
The CrossFire Edition
graphics card.
DMS connector
DVI connector (connectting
to the monitor)
Important
1. Mainboard photos shown in this section are for demonstration only. The ap-
pearance of your mainboard may vary depending on the model you purchase.
®
2. Only Windows
-sional x64 Edition support the CrossFire function.
3. Always install the CrossFire Edition graphics card in the Primary PCIEX16
slot (PEG1), and install the CrossFire Ready graphics card in the Second-
ary PCIEX16 slot (PEG2) to make the Cross Fire technology functions
properly.
XP with Service Pack 2 (SP2)& Windows
Hardware Setup
T he Cros sFire Ready
graphics card.
DVI connector
®
XP Profes
2-25