Connecting To A Tv With - Magnavox MRD-200 User Manual

1
Connect the DVD Receiver's Pr/Cr Pb/Cb Y COMPONENT
VIDEO OUT jacks to the matching Pr/Cr Pb/Cb Y VIDEO IN jacks
on the TV. You will need a component video cable (Green-Y; Blue-
Pb/Cb; Red- Pr/Cr) (not supplied). Match the cable colors to the
jack colors.
2
To hear TV channels through the DVD Home Cinema System,
connect the supplied red and white audio cables to the
DVD Receiver's red/white, right/left (TV) AUDIO IN jacks
and to the TV'S right/left AUDIO OUT jacks. Match the cable
colors to the jack colors.
3
Connect the power cords of the DVD Receiver and TV to a
power outlet.
4
Turn on the TV and set it to the correct Component Video
In channel. Go to the lowest TV channel and change channels
down until you find the Component Video In channel. (It is not
channel 3 or 4 as it might be when using a VCR.)
owner's manual for details.
5
Press STANDBY-ON y y on the front of the DVD Receiver to
turn on the DVD Receiver. The red Standby light will disappear.
6
Set VIDEO OUT to PR PB Y.
TV SHAPE
TV SYSTEM
VIDEO OUT S-VIDEO
SCR SAVER PR PB Y/SCART
PR PB Y
Hookups - TV (cont'd) 11

Connecting to a TV with

Component Video In Jacks
COMPONENT
PWCr PWCw Y
VIDEO OUT
AM
CENTER
VIDEO
AUDIO OUT AUDIO IN S-VIDEO
LINE OUT
OUT
OUT
DIGITAL OUT
L
FM
(7Ω )
R
WOOFER
AM/FM
TV AUX
OPTICAL COAXIAL
LINE OUT
ANTENNA
See your TV
Details are on page 28.
FR FL C SR SL
+
+
SPEAKER (4Ω )
Helpful Hint
• On the TV, the Component
Video In jacks may be labeled
YUV or Pr/Cr Pb/Cb Y and may
be red, blue, and green.