Table of Contents
Advertisement
DVD Setup Menu Options
Sound Setup Page
NIGHT MODE
CNTR DELAY
REAR DELAY
TEST TONE
34
(underlined options are the factory default settings)
This mode optimizes playback of sound at low volume. High
volume outputs will be softened and low volume outputs will be
enhanced to an audible level. This feature is only applicable for
DVD video discs with Dolby Digital mode.
{ OFF }
– Turns off night mode feature. Selects this to
enjoy the surround sound with its full
dynamic range.
{ ON }
– Turns on night mode.
Set the delay time in relation to the listening position/distance
from the center speaker. Use
(5ms, 3ms, 2ms, 1ms or OFF) and press OK to confi rm.
Set the delay time in relation to the listening position/distance
from the rear speakers. Use
(15ms, 12ms, 9ms, 6ms, 3ms or OFF) and press OK to confi rm.
Note: 1 ms increase/decrease of delay time is equivalent to 30
cm change in distance. Use the longer delay time settings when
the rear speakers are closer to the listener than the front
speakers.
This feature helps you to judge the sound level of each speaker.
{ OFF }
– Turns off test tone.
{ ON}
– Turns on test tone, the test signal will be
automatically generated when you set the
speakers' channels.
(continued)
keys to set the delay times
keys to set the delay times
Advertisement
Table of Contents
