Before You Start; Finding A Viewing Video Source Input On Your Tv; Initial Setup - Magnavox MRD430B Owner's Manual

5.

BEFORE YOU START

5.1. Finding a Viewing Video Source Input on Your TV

After you have completed all of the connections to your TV, review the steps below.
1. Press [ (POWER-ON)] to Turn On the unit.
2. Turn On your TV.
3. Please locate the Source / Input / AUX / Video button on TV's remote control. The button may vary on the TV brand
and model. Once you have located the button, press until you see "Please Wait..." or the Initial Setup Menu on the
Screen.
This is the correct viewing of the video Source Input.
• If the TV is connected by an HDMI cable, it may take a few moments for the opening picture to appear.
• If a certain amount of time has passed since you Turned On the unit, welcome screen only appears the first time you
Turn On the unit.

5.2. Initial Setup

Please follow the instructions below to complete the initial setup.
1. While welcome screen is displayed, use [
2. Language setup screen will appear. Use [
Please select your language for on-screen display.
English
Español
Français
Return
3. "Quick Start Mode" screen will appear. Use [
EN - 14
Please Wait...
] to select "Next", then press [OK].
] to select your language, then press [OK].
Language
] to select the desired mode, then press [OK].
continued on next page