Avaya M7100 User Manual page 43

· Caller ID Inspect: Feature 811
This function allows you to see the caller ID of a call on another line without interrupting the current call to which
you are connected.
· Caller Name Display: Feature 933
This function allows you to swap the display of caller ID name and number information on the phone.
· Calling Group: Button 01, 71 to 74
This function allows you to call the calling group represented by the button. Putting a * in front of the group
number allows you to page the group instead.
Conference Drop
·
This function allows you to select and drop a call from a conference.
· Contact Closure 1: Feature 9*41
This function you to operate the system's contact closure 1 connection which might, for example, be connected to a
door control. To use this, you must be a member of the system's contact closure group.
· Contact Closure 2: Feature 9*42
This function you to operate the system's contact closure 2 connection. To use this, you must be a member of the
system's contact closure group.
Do Not Disturb
· 27
This function allows you to switch do not disturb on or off.
· Hot Dial: Feature 935
This function allows you to dial a stored number without first going off hook or pressing the SPEAKER button.
· Hunt Group: Button 01, 771 to 776
This function allows you to call the hunt group represented by the button. Put * in front of the group number in
order to page the group instead of calling it.
· Idle Line Pickup: Button 01, 8
This function allows you to seize a line if that line is idle. You can use this to access a line for which you do not have
a line appearance button available on your phone.
Last Number Redial
·
This function allows you to redial the last external number dialed.
Loudspeaker Paging
·
This function allows you to make a page call to the extension configured as being connected to the loudspeaker
equipment.
· Message Alert Notification: Feature 938
This function allows you to see the current state of other user's message waiting lamps. It is used in conjunction
with other users for which you have Auto Dial - Intercom buttons.
· Night Service Button: #503
A night service button is used to switch night service on/off.
Pickup Group:
·
18
This function allows you to answer a call being presented to any extension that is a member of the pickup group (1
to 4) configured for the button.
Privacy : Feature 83
· 24
This function allows you to turn privacy on or off. When on, other extensions are not able to bridge into your calls.
· Recall: Feature 71
This function allows you to send a recall or hook flash signal.
· Saved Number Redial: Feature 67
This function allows you to save the number dialed during a call and to redial that number when idle. This can be
used when the number dialed does not answer.
Simultaneous Page
·
This function allows you to make a page call to both the loudspeaker extension and the extensions in first calling
group, 71.
Station Lock : Feature 936
·
27
This function allows you to lock and unlock your extension from being used to make calls. When selected, you are
prompted to enter a four digit code after which the extension is locked. If the extension is already locked, use of
this function prompts for reentry of the four digit code to unlock the extension.
Station Unlock
· 27
This function can only be used by the first two extensions in the system. It allows the user to unlock any extension
without needing to know the code that was used to lock that extension.
VMS Cover : Feature 984
· 36
This function allows the you to switch use of voicemail coverage for your extension on or off.
PARTNER Mode M7100 Phone User Guide
IP Office Essential Edition
: Feature 934
23
: Feature 85
: Feature 5
16
: Button 01, 70
16
Button 01, 661 to 664
: Button 01, *70
16
: Feature 937
Phone Settings: Button Programming
- Issue 3e (22 May 2011)
Page 43