Installing The Speaker Cover And Keyboard - Toshiba Satellite A100 Maintenance Manual

4 Replacement Procedures
3. Remove two M2.5x2.6 black bind securing screws.
4. Disconnect the keyboard cable from CN11 on the system board.

Installing the Speaker Cover and Keyboard

Install the speaker cover and keyboard according to the following procedures and Figures 4-
12, 4-13.
1. Connect the keyboard cable to CN11 on the system board.
2. Secure the keyboard with two M2.5x2.6 black bind screws.
3. Place the speaker cover in the correct position and secure the following 10 latches, in
that order:
- Six bottom latches
- Four front latches
4. Close the display and turn the computer over.
4-26
Figure 4-13 Removing the keyboard
Satellite A100/A105 / TECRA A7
4.3 Speaker over and Keyboard
Maintenance Manual