Nortel M7310 Quick Reference Manual page 3

Your Enterprise Edge M7310 Telephone
Shift button
For using the top function of a dual-memory button.
Display
shows the time, date, call information, and guides you.
The lower line of the display is reserved for display button instructions.
Dual-memory buttons
store any two features and/or autodial numbers.
Display buttons
Feature button
starts or ends a feature.
Release button
cancels active calls.
Hold button
Dial pad
Memory and line buttons
are buttons with indicators for one
touch dialing, feature operation
or line access.
Volume control
Indicators
appear beside lines and features.
Using display
buttons
Using Button
Inquiry
Adjusting display
contrast
Selecting a ring
type and volume
level
Page 1 Enterprise Edge M7310 Quick Reference Guide
Three display buttons appear
directly below the display. When
active, these buttons appear in
capital letters on the second line of
the display. In this document,
display buttons appear as
underlined, capital letters: for
example, OK.
Check what is programmed on your memory buttons.
1. Release all calls or lines with dial tone.
ƒ•‚
2. Press
3. Press the button(s) that you want to check and read the display.
ƒ
4. Press
ƒ•‡
1. Press
UP DOWN
2. Press or
OK
3. Press when finished.
ĥfl
1. Press
⁄ ¤ ‹
2. Press , ,
3. While the telephone is ringing, press
volume level.
OK
4. Press to store the volume level and ring.
.
when finished.
.
for the level you want.
.
›
NEXT
, , or to hear the different ring types.
√
Display message
Contrast level 2 Contrast level 2
Contrast level 2 Contrast level 2
DOWN DOWN DOWN DOWN UP UP UP UP OK OK OK OK
Display button
message
Display buttons
to adjust the