Radio Shack TRC-502 Owner's Manual page 9

21-1702.fm Page 9 Thursday, August 5, 1999 1:02 PM
Follow these steps to install the CB as a
base station.
Antenna
Wire
Black Wire
to Negative
Terminal of
DC Power
Supply
1. Mount the base station antenna as
described in it's owner's manual.
2. Connect the antenna to
3. Connect the CB's black power wire
to the negative (–) terminal on the
DC power supply.
4. Connect the CB's red wire to the
positive (+) terminal on the DC
power supply.
5. Connect the DC power supply to a
standard AC outlet.
Caution: To prevent damage to the CB,
be sure you connect an antenna and the
microphone before you use the CB.
Red Wire
to Positive
Terminal of
DC Power
Supply
.
ANTENNA
9