Operation; Receiving Transmissions And Adjusting Squelch - Radio Shack TRC-502 Owner's Manual

21-1702.fm Page 10 Thursday, August 5, 1999 1:02 PM

OPERATION

Before you use your CB, you should
know how to use it effectively and cour-
teously. "Operational Hints" on Page 12
contains information that will help you
get more enjoyment from our CB.
RECEIVING
TRANSMISSIONS AND
ADJUSTING SQUELCH
1. Turn fully counterclock-
SQUELCH
wise.
2. Turn on the CB by turning
clockwise until it clicks. The channel
display lights and the channel num-
ber appears.
3. Press or
to select the desired channel.
10
4. Adjust
tening level.
5. To
between transmissions, wait until
there is no signal, then slowly turn
SQUELCH
ground noise stops.
Note: To receive very weak signals,
turn
You hear noise between transmis-
sions, but you also hear weak trans-
missions.
6. To turn off the CB, turn
counterclockwise until you hear it
click. The channel display turns off.
VOLUME
on the base
to a comfortable lis-
VOLUME
cut out background
clockwise until the back-
counterclockwise.
SQUELCH
noise
VOLUME