Troubleshooting - Radio Shack TRC-502 Owner's Manual

21-1702.fm Page 15 Thursday, August 5, 1999 1:02 PM

TROUBLESHOOTING

If your CB is not working as it should, follow these suggestions to see if you can elim-
inate the problem. If you cannot, take the CB to your local RadioShack store for as-
sistance.
Symptom
CB has trouble receiving.
CB has trouble transmit-
ting.
Radio does not work at all. Power connected? Secure connections.
Cannot select a channel.
Check/Try
Turn CB power on.
Microphone connected? Secure connections.
Antenna connected? Secure connections.
Too much squelch? Adjust as needed.
Radio not on an operating channel? Switch to an
active channel.
Adjust .
VOLUME
Turn power on.
Antenna connected? Secure connections.
All connections free of corrosion? Clean and tighten.
Microphone connector loose? Firmly press connector
into MIC jack.
Radio not on an operating channel? Switch to an
active channel.
fully pressed? Press completely.
PUSH TO TALK
Microphone connected? Secure connections.
Antenna connected? Secure connections.
Fuse needs replacing? Replace with identical fuse.
See "Replacing the Fuse" on Page 17.
pressed? Release
PUSH TO TALK
.
PUSH TO TALK
15