Fujitsu ETERNUS DX200 S3 Configuration Manual page 82

Chapter 5 General Settings
5.4 Storage Management (Initial Setup 1)
(1)
A message to confirm whether to register the SED authentication key is displayed. Click the [Next
>>] button.
A confirmation screen appears.
(2)
Click the [OK] button.
The SED authentication key is registered and the registration completion screen appears.
(3)
Click the [Done] button.
The [Setup Network Environment] screen appears.
•
•
7
Set the network environment.
Set the ETERNUS DX Disk storage system environment for network communication.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
The SED authentication key can be registered even if no SEDs are or will be installed.
When SEDs are already installed in the ETERNUS DX Disk storage system, a message that re-
quests rebooting appears. Reboot the ETERNUS DX Disk storage system according to the dis-
played message.
Copyright 2014 FUJITSU LIMITED
82
P3AM-7652-02ENZ0