Fujitsu ETERNUS DX200 S3 Configuration Manual page 166

Chapter 9 Advanced Copy Settings
9.2 Performing a Copy (SnapOPC+)
14
Change the status of all the disks with [Offline] to [Online]. In this case, change the status of Disk 1
through to Disk 8 to [Online].
After the status of the disks is changed to [Online], file systems and drive letters are assigned.
If any drive letter is unused, the unused drive letter is assigned in ascending order of the drive let-
ters, which results in discontinuous drive letters. Change the automatically assigned drive letter if
necessary.
15
Check if the file that was created in
Settings" (page 150)
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Step 8 in "■ Operation Disk Settings" (page 150)
is displayed for the copy source drive.
166
Copyright 2014 FUJITSU LIMITED
in "8.2.3.2 Disk
P3AM-7652-02ENZ0