Chapter 8
SAN Connection Settings
8.1
Connection Settings for the ETERNUS DX Disk Storage System
The LUNs that are to be registered in the LUN group and the information for the volumes that are allo-
cated to the LUNs are displayed.
5
Click the [Create] button.
A confirmation screen appears.
6
Click the [OK] button.
The LUN group is added and the setting completion screen appears.
7
Click the [Done] button.
The screen display returns to the [LUN Group] screen.
8.1.2.5
Host Affinity Creation
Create an association between a host group, a CA port group, and a LUN group to enable the host to recog-
nize a LUN group.
The procedure to create a host affinity is as follows:
1
Click the [Connectivity] tab on the navigation of the ETERNUS Web GUI screen. On the [Connectivity]
screen, click [Create Host Affinity] in [Action].
The [Create Host Affinity] screen appears.
2
Select "Host Group - CA Port Group" in "Target Connection".
3
Select the "Host Group", the "CA Port Group", and the "LUN Group" that are to be associated.
(1)
Click the [Browse] button in [Host Group].
A screen to select the host group appears.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
132
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0