Environmental Protection - Fujitsu PRIMECENTER M1 User Manual

Important Information
2.3

Environmental Protection

Environmentally Friendly Product Design and Development
This product has been designed in accordance with the Fujitsu standard for
"environmentally friendly product design and development". This means that
key factors such as durability, selection and labeling of materials, emissions,
packaging, ease of dismantling and recycling have been taken into account.
This saves resources and thus reduces the harm done to the environment.
Further information can be found at:
http://www.fujitsu-general.com/global/corporate/eco/products/products.html
Energy-saving information
Devices that do not need to be constantly switched on should be switched off
until they are needed as well as during long breaks and after completion of work.
Notes on Saving Energy
Devices that do not have to be on permanently should not be switched on until they
are needed and should be switched off during long breaks and when work is finished.
Notes on Packaging
We recommend that you do not throw away the original packaging in case you
need it later for transportation. If possible, devices should be transported in their
original packaging.
Notes on Labeling Plastic Housing Parts
Please avoid attaching your own labels to plastic housing parts wherever
possible, since this makes it difficult to recycle them.
Take-back, Recycling and Disposal
For details on take-back and reuse of devices and consumables within Europe,
contact your Fujitsu Technology Solutions branch office/subsidiary or our
recycling center in Paderborn:
Fujitsu Technology Solutions GmbH
Recycling Center
D-33106 Paderborn
Tel.: ++49 5251 525 - 1410
Fax: ++49 5251 525 - 321410
20