Fujitsu PRIMECENTER M1 User Manual page 12

Preface
Optional, telescopic anti-tilt protection. Earthquake security on
request.
Cable Optimized cable routing solutions for all symmetrical and
management: asymmetrical rack types. Asymmetrical racks prepared for the
patented lateral cable management. Cabling openings in the
roof of the rack, in the floor group and in the rear door.
Service: Doors can be optionally mounted to the left or right, and can be
unhinged easily by a single person.
Split rear doors to reduce the required service space.
Increased space for cabling at the front (80-100 mm) and rear
(180 mm).
19" rack profiles with 740 mm depth distance.
Numbering of the height units can be seen from the front and rear.
Complete extraction thanks to telescopic rails available for
servers with hot-replace components.
Shipment: Optional ex works, fully mounted and tested including cabling.
Shipment including 4 heavy-duty castors and 4 adjusting feet
on a shock-absorbing pallet.
Other Extension: can be placed horizontally in a row (provided
features: identical variants are used).
Operation in normally air-conditioned rooms up to 35°C.
Optional anti-tilt protection solution; can be mounted under the
rack, telescopic.
Large portfolio of rack infrastructure components that can be
configured using the rack configuration tool SystemArchitect
with a cabling assistant for automatic console and power
cabling as well as power value calculation (Power-Calculator).
PRIMECENTER M1 Racks meet national and international
standards:
– EIA-310-D
– DIN 41494
– IEC 60297
12
®