Exp; Specifying The External Pedal Function For Each Patch; Assign; Assign Common - Boss GT-001 Parameter Manual

MENU
Knob Parameter Value
OFF, ON
[2] MIN
(or STOP, START,
PLAY)
OFF, ON
[3] MAX
(or STOP, START,
PLAY)
This sets the behavior of the value each time the switch is
operation.
MODE
MOMENT
[4]
(SOURCE
MODE)
TOGGLE

EXP

Here's how to assign the parameters that will be controlled by an
expression pedal (such as the separately available EV-5) connected
to the CTL/EXP jack.
Knob Parameter Value
OFF
FV
(FOOT VOLUME)
PB
(PEDAL BEND)
WAH
[1] FUNC
PB/FV
WAH/FV
PAT LV
(PATCH LEVEL) *1
MIN
[3] 0–200
(PATCH LEVEL
MIN) *2
MAX
[4] 0–200
(PATCH LEVEL
MAX) *2
This is shown only if PERFORMANCE (p. 35) is set to SYSTEM.
*2 Shown only if PATCH LEVEL is selected in FUNC.
26
Explanation
This sets the value for times when the
switch is Off.
This sets the value for times when the
switch is On.
The normal state is Off (minimum value),
with the switch On (maximum value)
only while the footswitch is depressed.
The setting is toggled On (maximum
value) or Off (minimum value) with each
press of the footswitch.
Explanation
No assignment.
Foot volume will be assigned.
Pedal bend will be assigned.
Wah will be assigned.
Pedal bend and foot volume
will be assigned.
Wah and foot volume will be
assigned.
Patch level will be assigned.
Specifies the minimum value.
Specifies the maximum value.
Specifying the External Pedal Function
for Each Patch (Assign)
Here's how the function of an external pedal (footswitch, expression
pedal) connected to the CTL/EXP jack can be specified for each
patch. For each patch, you can make eight different assignments
(assign number 1–8) that specify which pedal controls which
parameter.
* Select each individual parameter to specify which pedal will
control each parameter.
1.
Choose [MENU]""CTL/EXP"""ASSIGN C (COMMON)" or
"ASSIGN 1–8 . "
2.
Set the parameter values with knobs [1]–[4] .

ASSIGN COMMON

Knob Parameter Value
SENS
[1] 0–100
(INPUT SENS)
ASSIGN 1–8
Knob Parameter Value
[1]

ASSIGN

OFF, ON
EXP PDL
(EXP PEDAL)
CTL1 PDL
(CTL1 PEDAL)
CTL2 PDL
(CTL2 PEDAL)
INT PDL
(INTERNAL
[2] SOURCE
PEDAL)
WAV PDL
(WAVE PEDAL)
INPUT
(INPUT LEVEL)
CC#1–#31
CC#64–#95
MOMENT
MODE
[3]
(SOURCE MODE)
TOGGLE
Page 2
CATEGORY
This selects the parameter to be changed.
[1]
(TARGET
CATEGORY)
Refer to TARGET list
[2] TARGET
This sets the minimum value for the range in which
MIN
[3] the parameter can change. The value differs depend-
(TARGET MIN)
ing on the parameter assigned for TARGET parameter.
This sets the maximum value for the range in
MAX
which the parameter can change. The value differs
[4]
depending on the parameter assigned for TARGET
(TARGET MAX)
parameter.
Explanation
This adjusts the input sensitivity when INPUT
LEVEL is selected for SOURCE.
Explanation
Turns the ASSIGN 1–8 on/off.
Assigns the external footswitch
(FS-5U, FS-6; available separately)
connected to the CTL/EXP jack.
Assigns the external footswitch
(FS-5U, FS-6; available separately)
connected to the CTL/EXP jack.
Assigns the external footswitch
(FS-5U, FS-6; available separately)
connected to the CTL/EXP jack.
Refer to "Virtual expression pedal
system (Internal Pedal / Wave
Pedal)" (p. 31)
Refer to "Virtual expression pedal
system (Internal Pedal / Wave
Pedal)" (p. 31)
The assigned target parameter
will change according to the input
level.
Control Change messages from an
external MIDI device.
Control Change messages from an
external MIDI device.
The normal state is Off (minimum
value), with the switch On
(maximum value) only while the
footswitch is depressed.
The setting is toggled On
(maximum value) or Off
(minimum value) with each press
of the footswitch.