Programming The Heating In 7 Day Mode - Danfoss FP715Si User Manual

If the same programme is required
press the COPY button and the
previous days programme will be
entered.
If a diff erent programme is
required repeat steps 2-4.
5. Press the PROG button once to
enter hot water programming or
twice to return to run mode.
6. Proceed to page 14.
Please Note
If this setting is made on a weekend day SASU will show in
place of MOTUWETHFR.

1.7.2 Programming the heating in 7 day mode

1. Press PROG once until SET CH
ON TIME appears at the top of
the display. Note the current day
is displayed. Press the DAY/HOL
button until the required day is
displayed.
2. Use the + or - buttons to set the
time you want your heating to fi rst
come on in the morning (Event 1).
3. Press NEXT ON/OFF to move to
Event 2.
Danfoss Heating
DAY/HOL
GB
DAY/HOL
DAY/HOL
DAY/HOL
11