User Instructions; Your Programmer; Preset Programmes - Danfoss FP715Si User Manual

1.0 User Instructions

1.1 Your Programmer

The FP715 Si allows you to switch your heating and hot water on and
off at times that suit you.
GB
Your programmer has had the date and time set up during
manufacture and will automatically change between Greenwich
Mean Time and British Summer Time.
You can programme up to 3 ON/OFF times per day for the heating and
the hot water and the two systems can be operated independently.
1.2
Your FP715 Si comes ready programmed with a set of operating
times which often suit most people.
Event No.
1
2
3*
4*
5
6
* Not applicable if unit set to 2 ON/OFF's per day by installer
**Not applicable if unit set to 24 hour mode by installer
See page 9 for explanations of diff erent settings
If you want to change any of these settings, you can do so by
following the instructions on pages 9-14. First, follow the steps on
page 7-8 to set the correct time and date.
6
Preset Programme
Hot Water and
Heating
1st ON
1st OFF
2nd ON*
2nd OFF*
3rd ON
3rd OFF
s
Mon-Fri
6:30
8:30
12:00*
12:00*
17:00
22:30
Sat-Sun**
7:30
10:00
12:00*
12:00*
17:00
22:30
FP715SI