Speaker Assembly - HP Compaq 6910p Maintenance And Service Manual

Speaker assembly

Description
Speaker assembly
Before removing the speaker assembly, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC Adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
MultiBay II device (see
b.
Keyboard (see
c.
Switch cover (see
d.
Display assembly (see
e.
Top cover (see
f.
Remove the speaker assembly:
Disconnect the speaker cable (1) from the system board.
1.
Remove the speaker assembly (2) from the base enclosure.
2.
Reverse this procedure to install the speaker assembly.
82 Chapter 4 Removal and replacement procedures
Battery on page 42).
Hard drive on page 46)
MultiBay II device on page
Keyboard on page 57)
Switch cover on page
Display assembly on page
Top cover on page 76)
56)
64)
71)
Spare part number
446445-001