Backup And Recovery In Windows Xp; Creating Recovery Discs - HP Compaq 6910p Maintenance And Service Manual

Backup and recovery in
9
Windows XP

Creating recovery discs

After setting up the computer for the first time, be sure to create a set of recovery discs of the full factory
image. The recovery discs are used to start up (boot) the computer and recover the operating system and
software to factory settings in case of system instability or failure.
Note the following guidelines before creating recovery discs:
You will need high-quality CD-R, DVD-R, or DVD+R discs (purchased separately).
●
NOTE:
and Recovery Manager.
● The computer must be connected to AC power during the process.
Only one set of the recovery discs can be created per computer.
●
Number each disc before inserting it into the optical drive of the computer.
●
If necessary, you can cancel the disc creation before you have finished creating the recovery discs.
●
The next time you select Create factory software recovery CDs or DVDs to recover the
system (Highly recommended), you will be prompted to continue the disc creation.
To create a set of recovery discs:
Select Start > All Programs > HP Backup & Recovery > HP Backup and Recovery
1.
Manager.
Click Next.
2.
Click Create factory software recovery CDs or DVDs to recover the system (Highly
3.
recommended), and then click Next.
Follow the on-screen instructions.
4.
Read-write discs, such as CD-RW and DVD±RW discs, are not compatible with HP Backup
Creating recovery discs 135