Multibay Ii Device - HP Compaq 6910p Maintenance And Service Manual

MultiBay II device

Description
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
DVD/CD-RW Combo Drive
DVD-ROM Drive
Before removing the MultiBay II device, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC Adapter from the computer.
Remove the battery (see
4.
Remove the optical drive:
Position the computer with the left side toward you.
1.
If present, remove the Phillips PM2.5×5.0 screw (1) that secures the MultiBay II device to the
2.
computer.
Push in on the right side of the MultiBay II device (2). (The MultiBay II device partially ejects from
3.
the MultiBay II.)
Remove the MultiBay II device (3) from the computer.
4.
Reverse this procedure to install a MultiBay II device.
56 Chapter 4 Removal and replacement procedures
Battery on page 42).
Spare part number
446409-001
446410-001
446408-001