Wwan Module - HP Compaq 6910p Maintenance And Service Manual

WWAN module

CAUTION:
Description
Verizon EVDO WWAN module
Cingular HSPDA WWAN module
Vodafone HSPDA WWAN module
Before removing the WWAN module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC Adapter from the computer.
Remove the battery (see
4.
Release the keyboard (see
5.
Remove the WWAN module:
Disconnect the WWAN antenna cables (1) from the terminals on the WWAN module.
1.
NOTE:
blue WWAN antenna cable is connected to the WWAN module "Aux" terminal.
Remove the two Phillips PM2.0×3.0 screws (2) that secure the WWAN module to the computer.
2.
(The edge of the module opposite the slot rises away from the computer.)
Remove the WWAN module (3) by pulling the module away from the slot at an angle.
3.
NOTE:
The WWAN module and WLAN module are not interchangeable.
Battery on page
Keyboard on page
The red WWAN antenna cable is connected to the WWAN module "Main" terminal. The
WWAN modules are designed with a notch (4) to prevent incorrect installation.
42).
57).
Component replacement procedures
Spare part number
418860-001
436638-001
435098-001
63