Battery Low Indication; Operation; Navigating The Menu; Setting The Language - Topcom BUTLER E2100 TRIPLE User Manual

Topcom Butler E2100 TWIN/TRIPLE
Put the handset on the base unit.
Charge the handset for a period of 24 hours before using the handset for the first time. To
extend the battery life time, discharge the batteries completely from time to time. As soon as
the handset emits a warning tone or when the battery icon
on the base/charger unit for charging.
4

Battery low indication

When the battery is empty, the handset no longer carries out operations. When a battery is
completely empty and you have put the handset on the base unit for a short period of time,
the battery symbol will appear to be fully charged but this is actually not the case. The battery
capacity will decrease rapidly. We advise you to put the handset on the base unit for 12 hours
so that it can be recharged completely.
• Full battery
• Empty battery
When you are in the middle of a conversation and the battery is almost empty, the handset
will emit a warning signal. Place the handset on the base unit to charge.
5

Operation

5.1

Navigating the menu

The Butler E2100 has a menu system which is easy to use. Each menu leads to a list of
options. To enter the menu, press the menu button
to scroll to the menu option you want.  Press
the setting displayed. To go back in the menu press the delete button
5.2

Setting the language

Press menu button
press .  Scroll to 'LANGUAGE' and press
OK
▲
with the up or down
5.3 Setting the date and time
The date and time are stored inside the base. The date and time can be set by each handset
but it's not needed to set it per handset individual:
Press menu button
press .  Enter the year by the numerical keypad (09 = 2009...) and press
OK
Enter the month by the numerical keypad (01 = January...) and press
day of the month and press
the minutes by the numerical keypad and press
• When removing the base power, you have to set the date and time again!
• If you have CallerID on your telephone line and the operator sends date and
time, your clock will be set automatically on an incoming call.
8
▲
.  Use the up
OK
button and press
▲
.  Use the up
OK
.  Enter the hours (24h format) and press
OK
is empty, you have to put it back
.  Use the up
OK
to select further options or to confirm
OK
or down button to scroll to 'HANDSET' and
.  Scroll to the language you want
OK
.
OK
or down button to scroll to 'DATE TIME' and
.
OK
Topcom Butler E2100 TWIN/TRIPLE
▲
or down button
.
C
.
OK
.  Enter the
OK
.  Enter
OK