AT&T 1080 Quick Reference Manual page 16

To dial a one-touch number
For more information about using the display
screen menus, see the Menu operation section of
your installation guide.
This phone comes with one-touch preference
preset to INTERCOM.
NOTE: To change the one-touch preference, see
the PREFERENCE section of your installation guide.
If one-touch preference is set to INTERCOM:
. Lift the handset.
-OR-
Press [ SPEAKER].
-OR-
Press [HEADSET].
. After you hear the dial tone, press the one-touch
button.
-OR-
Press [LOWER], then press the one-touch
button for the destination number you want to
call. The screen displays the number as it is
dialed.
If one-touch preference is set to TELEPHONE,
you do not need to go off hook and listen for a
dial tone before dialing a one-touch number. You
can simply:
Press the one-touch button.
-OR-
Press [LOWER], then press the one-touch button
for the desired number to call.
The screen displays the number as it is
dialed using the speakerphone or headset as
programmed for automatic mode. (See the
AUTOMATIC MODE section of your installation
guide.)
5