Configure Wep - D-Link DHP-1565 User Manual

Section 4 - Security
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1).
2. Click on Setup and then click Wireless Settings on the left side.
3. Click the Manual Wireless Connection Setup button.
4. Next to Security Mode, select WEP.
5. Next to WEP Encryption, select 64bit or 128bit.
6. Next to Default WEP Key, select the WEP key you would like to use as the default
WEP key. The available option is WEP Key 1.
7. Enter the WEP key you would like to use in the WEP Key field.
8. Click Save Settings to save your settings. If you are configuring the router with a
wireless adapter, you will lose connectivity until you enable WEP on your adapter
and enter the same WEP key as you did on the router.
D-Link DHP-1565 User Manual

Configure WEP

138