Table of Contents
Advertisement
Section 3 - Configuration
This mode is used when your ISP provides you with a set IPv6 addresses that does not change. The IPv6 information is manually entered in your
IPv6 configuration settings. You must enter the IPv6 address, Subnet Prefix Length, Default Gateway, Primary DNS Server, and Secondary DNS
Server. Your ISP provides you with all this information.
Use Link-Local
The Link-local address is used by nodes and routers
Address:
when communicating with neighboring nodes on the
same link. This mode enables IPv6- capable devices to
communicate with each other on the LAN side.
IPv6 Address:
Enter the WAN IPv6 address for the router here.
Subnet Prefix
Enter the WAN subnet prefix length value used here.
Length:
Default
Enter the WAN default gateway IPv6 address used here.
Gateway:
Primary IPv6
Enter the WAN primary DNS Server address used here.
DNS Address:
Secondary IPv6
Enter the WAN secondary DNS Server address used here.
DNS Address:
LAN IPv6
These are the settings of the LAN (Local Area Network) IPv6 interface for the router. The router's LAN IPv6 Address configuration is
Address:
based on the IPv6 Address and Subnet assigned by your ISP. (A subnet with prefix /64 is supported in LAN.)
Click on the Next button to continue. Click on the Prev button to return to the previous page.
Click on the Cancel button to discard all the changes made and return to the main page.
D-Link DHP-1565 User Manual
IPv6
Static IPv6
48
Hide quick links:
Advertisement
Table of Contents
