Ipv6 Firewall - D-Link DHP-1565 User Manual

Section 3 - Configuration
On this page the user can configure the IPv6 firewall settings. The firewall settings section is an advance feature that is used to allow or deny
traffic from passing through the device. It works in the same way as IP Filters with additional settings. You can create more detailed rules for the
device.
Name:
Enter a custom firewall rule name here. This name is
used for identification.
Source Interface:
Select the appropriate source interface used here.
Destination
Select the appropriate destination interface used
Interface:
here.
Schedule:
Select a time schedule that will be applied to this rules
here.
IP Address Range:
Enter the IPv6 address range used here.
Protocol:
Select the protocol used for this rule here. Options to
choose from are ALL, TCP, UDP, and ICMP.
Port Range:
Enter the port range used for this rule here.
D-Link DHP-1565 User Manual

IPv6 Firewall

82