Oki MC860 User Manual page 160

STATUS / MESSAGE
CODE
Error Please change Belt Unit: %ERRCODE%
355
Error Please check Fuser Unit: %ERRCODE%
348
Error Please check %COLOR% Toner Cartridge:
%ERRCODE%
544
545
546
547
Error Please check %COLOR% Image Drum
340
341
342
343
Error Please check Fuser Unit
320
Error Please check Belt Unit
330
Error Power Off and Wait for a while
321
Error Cover Open
310 Close the flashing cover
311
Error Cover Open
316 Close the flashing cover
Error Cover Open
Close the flashing cover
Error Document jam!
Open & check the
flashing cover
Error Wait a Moment
Program Data Receiving
Error Wait a Moment
Program Data Received OK
MEANING / ACTION
The transfer belt has reached the end of its
life and printing will stop.
Warning status takes effect at cover open/
close.
Replace transfer belt.
Open the top cover, check the fuser is
installed correctly and close the cover.
If the code still displays, replace the fuser.
Toner cartridge lever has not been locked.
Lock into place securely.
Error 544: Y
Error 545: M
Error 546: C
Error 547: K
Image drum not installed correctly.
Fit image drum.
Error 340: Y
Error 341: M
Error 342: C
Error 343: K
Fuser unit is not installed correctly.
Fit fuser unit.
Belt unit is not installed correctly.
Fit belt unit.
Motor driver IC overheat detected.
Close the cover.
Error 310: Top cover
Error 311: Front cover
If the code still appears, contact your dealer.
Close the duplex cover.
If the code still appears, contact your dealer.
Indicates that the ADF cover is open.
Indicates that the inter-lock cover on the
scanner unit is lifted up.
Note: If the inter-lock cover is lifted up
during scanning from the ADF, a document
jam message will display.
If the code still appears, contact your dealer.
Indicates a document jam has occurred
during scanning.
See "Clearing paper jams"
If the code still appears, contact your dealer.
Your machine's network card firmware is
being reprogrammed.
Your machine's network card firmware is
being reprogrammed.
Troubleshooting > 160
.