D-Link xStack DES-3200-10 User Manual page 66

xStack
To return to the initial 802.1Q Static VLAN window, click the VLAN List tab at the top of the window. To change an
existing 802.1Q static VLAN entry, click the corresponding Edit button. A new window will appear to configure the port
settings and to assign a unique name and number to the new VLAN. See the table below for a description of the
parameters in the new window.
The following fields can then be set in the Add/Edit VLAN tab:
Parameter
VID (VLAN ID)
VLAN Name
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Figure 3 - 7. 802.1Q Static VLAN window – Add/Edit VLAN tab (Add)
NOTE: The Switch supports up to 4k static VLAN entries.
Figure 3 - 8. 802.1Q Static VLAN window – Add/Edit VLAN tab (Edit)
Description
Allows the entry of a VLAN ID, or displays the VLAN ID of an existing VLAN in the Edit
window. VLANs can be identified by either the VID or the VLAN name.
Allows the entry of a name for a new VLAN, or modifying the VLAN name in the Edit window.
65