Topology - D-Link xStack DES-3200-10 User Manual

xStack
After enabling the Switch to be a Commander Switch (CS), the Single IP Management folder will then contain four
added links to aid the user in configuring SIM through the Web, including Topology, Firmware Upgrade and
Configuration File Backup/Restore and Upload Log File.

Topology

The Topology window will be used to configure and manage the Switch within the SIM group and requires Java script
to function properly on your computer.
The Java Runtime Environment on your server should initiate and lead you to the Topology window:
The Topology window holds the following information under the Data tab:
Parameter Description
This field will display the Device Name of the switches in the SIM group configured by the user. If
Device Name
no Device Name is configured by the name, it will be given the name default and tagged with the
last six digits of the MAC Address to identify it.
Displays the number of the physical port on the MS or CaS that the CS is connected to. The CS
Remote Port
will have no entry in this field.
Displays the connection speed between the CS and the MS or CaS.
Speed
Displays the number of the physical port on the CS that the MS or CaS is connected to. The CS
Local Port
will have no entry in this field.
Displays the MAC address of the corresponding Switch.
MAC Address
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Figure 2 - 43. Topology window
47