Reauthenticate Port(S) - D-Link DES-6500 User Manual

D-Link DES-6500 Layer 3 Stackable Gigabit Ethernet Switch
Figure 4- 47. 802.1x Port Initial and Port Authentication state window
This window allows you to initialize a port or group of ports. The Initialize Port Table in the
bottom half of the window displays the current status of the port(s) once you have clicked
Apply.
This window displays the following information:
Parameter
Unit
From and To
Port
Auth PAE State
Backend State
Port Status

Reauthenticate Port(s)

This window allows you to reauthenticate a port or group of ports. The Reauthenticate Port
Table displays the current status of the port(s) once you have clicked Apply.
Click Reauthenticate Port(s) on the PAE Access Entity folder on the Configuration menu
to open the Reauthenticate Port(s) window:
Description
Allows you to select a switch from a switch stack using that switch's Unit ID.
Ports selected to be initialized.
A read only field indicating a port on the switch.
The Authenticator PAE State will display one of the following: Initialize,
Disconnected, Connecting, Authenticating, Authenticated, Aborting, Held,
ForceAuth, ForceUnauth, and N/A.
The Backend Authentication State will display one of the following: Request,
Response, Success, Fail, Timeout, Idle, Initialize, and N/A.
The status of the controlled port can be authorized, unauthorized, or N/A.
78