D-Link DES-6500 Layer 3 Stackable Gigabit Ethernet Switch
DVMRP Routing Next Hop Table. Information on DVMRP and its features in relation to
the DES-6500 can be found in Section 4, under IP Multicasting.
DVMRP Routing Table
Multicast routing information is gathered and stored by DVMRP in the DVMRP Routing
Table, which may be found in the Monitoring folder under DVMRP Monitoring, contains one
row for each route (source subnet) entry. Each routing entry contains multicast routing
information used by DVMRP in place of the unicast routing information. You may define
your search by entering a Source IP Address and its subnet mask into the fields at the top of
the page.
The following fields are displayed:
Parameter
Source IP Address
Source Mask
Upstream
Neighbor
Metric
Learned
Interface Name
Expire
DVMRP Neighbor Address Table
This table, found in the Monitoring menu under DVMRP Monitoring contains information
about DVMRP neighbors of the Switch and is a read only screen.
Figure 6- 33. DVMRP Routing Table
Description
This is the IP address of the multicast packets.
This is the subnet mask corresponding to the IP address above.
This is the IP address of any router that is between the currently displayed
router and the source of the multicast packets.
This is a measure of the relative "cost" of this route.
This indicates how the switch discovered this route.
This is the name of the IP interface on which the DVMRP router resides.
This is the amount of time the route will be considered valid without being
renewed.
177