Configuring Lacp Port Settings - D-Link DES-6500 User Manual

D-Link DES-6500 Layer 3 Stackable Gigabit Ethernet Switch
Master Port
Choose Member
Ports
Flooding Port

Configuring LACP Port Settings

To configure the LACP port settings, click the LACP Port Settings link to open the Lacp
Settings menu, as shown below.
The user-changeable parameters are as follows:
Parameter
to turn a port trunking group on or off. This is useful for diagnostics, to
quickly isolate a bandwidth intensive network device or to have an absolute
backup aggregation group that is not under automatic control.
Choose the Master port for the trunk group.
Choose the members of a trunked group. Up to 8 ports per group can be
assigned to a group.
A trunking group must designate one port to allow transmission of
broadcasts and unknown unicasts.
Figure 4- 5. LACP Configuration
Description
29