Jumpers; Onboard Leds - Asus Z97-WS User Manual

1.2.7

Jumpers

1. CPU Over Voltage jumper (3-pin CPU_OV)
The CPU Over Voltage jumper allows you to set a higher CPU voltage for a flexible
overclocking system, depending on the type of the installed CPU. To gain more CPU
voltage setting, insert the jumper to pins 2-3. To go back to its default CPU voltage
setting, insert the jumper to pins 1-2.
Z97-WS
Z97-WS CPU_OV setting
1.2.8

Onboard LEDs

1. POST State LEDs
The POST State LEDs provide the status of these key components during POST
(Power-On-Self Test): CPU, memory modules, VGA card, and hard disk drives. If an
error is found, the critical component's LED stays lit up until the problem is solved.
Z97-WS
Z97-WS CPU/DRAM/VGA LED
1-18
CPU_OV
1 2 2 3
Disable Enable
(default setting)
DRAM LED
CPU_LED
VGA_LED
Chapter 1: Product introduction