By default, all incoming IP traffic from the internet network is allowed. The Inbound Filter allows you to create a filter rule to filter incoming IP traffic
by specifying a filter name and at least one condition below. All of the specified conditions in this filter rule must be satisfied for the rule to take
effect.
ADD OUTBOUND IP FILTER
Type the filter name on the Filter Name.
Choose ICMP, TCP/UDP, TCP or UDP on the Protocol.
Type Source IP address, Source Subnet Mask and Source Port(port or
port::port means from which port to which port)
Type Destination IP address, Destination Subnet Mask and
Destination Port(port or port::port means from which port to which port)
Set the policy schedule on the Schedule, Always or never, or View
Available Schedules
Please click Add/Apply button to add the policy in the list.