Inbound Filter - D-Link DWR-111 User Manual

Table of Contents

Section 3 - Configuration

Inbound Filter enables you to control what packets are allowed to passthrough the router. Inbound filter only applies to packets that are destined

for Virtual Servers or DMZ hosts.

INBOUND FILTER SETTING

Inbound Filter:

Select this box to Enable the filter.

Use Schedule Rule:

You may select Always On or choose the number

of a schedule rule that you have defined.

Copy to ID:

Copies the predefined filter to the specified ID

INBOUND FILTER RULES LIST

ID:

Identifies the filter.

Source IP : Ports:

Specify the local IP address and then specify the

port after the colon.

Destination IP :

Specify the remote IP address and then the port

Ports:

after the colon.

Enable:

Select this box to enable the filter.

Schedule Rule #:

Specify the schedule rule number.

Go back to the previous filter page.

Advance to the next filter page.

Click Save Settings to save your changes, or click

Don't Save Settings to discard your changes.

D-Link DWR-111 User Manual

Inbound Filter

Table of Contents

Show Quick Links

Table of Contents