D-Link DSL-2740B User Manual page 19

Wireless adsl router

Hide thumbs Also See for DSL-2740B:

Table of Contents

Section 2 - Installation

Hub or Switch to Router Connection

Connect the Router to an uplink port (MDI-II) on an Ethernet hub or

switch with a straight-through cable as shown in this diagram. If you

wish to reserve the uplink port on the switch or hub for another

device, connect to any on the other MDI-X ports (1x, 2x, etc.) with a

crossed cable.

Computer to Router Connection

You can connect the Router directly to a 10/100BASE-TX Ethernet

adapter card (NIC) installed on a PC using the Ethernet cable

provided as shown in this diagram.

D-Link DSL-2740B User Manual

Table of Contents