Inbound Filter - D-Link DIR-514 User Manual

Section 3 - Configuration
Inbound Filter enables you to control what packets are allowed to come in to your network from the Internet. The inbound filter only applies
to packets that are destined for Virtual Servers or DMZ hosts. After modifying any settings, click Save Settings to save your changes.
INBOUND FILTER SETTING

Inbound Filter:

Select this box to Enable the filter.
Source IP : Ports:
Specify the local IP address and then
specify the port after the colon.
Destination IP : Ports:
Specify the remote IP address and
then the port after the colon.
Schedule:
Select a schedule for when the Application
Rule will be enabled if you do not see
the schedule you need in the list of
schedules, go to the Tools -> Schedules
screen and create a new schedule
D-Link DIR-514 User Manual
Inbound Filter
37