Outbound Filter - D-Link DSL-2740B User Manual

Section 3 - Configuration

OUTBOUND FILTER

By default, all outgoing IP traffic from the LAN is allowed. The Outbound Filter allows you to create a filter rule to block outgoing IP traffic by
specifying a filter name and at least one condition below. All of the specified conditions in this filter rule must be satisfied for the rule to take effect.
ADD OUTBOUND IP FILTER
Type the filter name on the Filter Name.
Choose ICMP, TCP/UDP, TCP or UDP on the
Protocol.
Type Source IP address, Source Subnet Mask
and Source Port(port or port::port means from
which port to which port)
Type Destination IP address, Destination Subnet
Mask and Destination Port(port or port::port
means from which port to which port)
Set the policy schedule on the Schedule, Always
or never, or View Available Schedules
Please click Add/Apply button to add the policy in
the list.
D-Link DSL-2740B User Manual 53