Radio And Hd Radio™ Tuner Operation; Radio/Hd Radio™ Tuner Basic Operation - Kenwood DNX570TR Quick Start Manual

Return to the Top page
Radio and HD Radio
R
adio and HD Radio™ Tuner Operation
Radio/HD Radio™ Tuner Basic Operation
Most functions can be controlled from the source control screen.
NOTE
• Set the remote control mode switch to AUD mode before starting operation, see
(P.121).
• HD Radio broadcasting can be received only by the DNX890HD, DNX690HD, DNX570HD, DNX570TR, and
DNX5080EX.
• HD Radio broadcasting is for North American sales area only.
• The screen shot below is for tuner. It may be different from the one for HD Radio broadcasting.
Simple Control screen
1
2
3
1 PS/Station name display
Displays the PS name or station name.
2 Information display/Control switching area
Displays the following information.
• Picture: The picture data or station Logo data is displayed if available from current content.
• [FM1] etc.: Band display
• MHz/kHz: Frequency display
• Preset #: Preset number
• HD# (HD Radio tuner only): Channel display
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
Touch to switch the multi function menu. For details on the menu, see
4 Preset key/Multi function menu
Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving
station or channel in memory.
When switched, various functions can be performed by using keys in this area.
For details on the menu, see
5 Sub function key
Touch to display "Sub function menu" (7 in this table).
58 58
5
4
Multi function menu (P.59).
Switching the operation mode
List Control screen
3
4
Multi function menu
2
6
7
8
(P.59).