Oil Fill; Lubrication - Dixon ZTR 4423 Operator's Manual

OIL FILL:

1. Push the valve body in and twist into the detent notch.
Closed
2. Clean any spilled oil from engine and chassis.
3. Refill engine with type, and quantity of oil recommended by the engine manufacturer in engine
literature.

LUBRICATION:

CHASSIS:
LOCATIONS:
SERVICE INTERVALS:
RECOMMENDED GREASE:
PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS.
CARE AND MAINTENANCE
Number of grease zerks used: (7)
(1) each front wheel caster and each front wheel hub.
(1) each mower deck
Every 50 hours of operation
Name brand wheel bearing or multi-purpose grease
Lubricate each front wheel to allow even distribution of
grease within the wheel, rotate or spin each front wheel
after (3) pumps of the grease gun. Repeat process until the
appearance of grease is noted completely around each
caster axle.
Lubrication of the mower deck hubs will help dispel moisture
within the hub casting. Bearings are of a sealed variety.
PROTECT YOUR ENVIRONMENT
Open
Page 29