Dixon ZTR 4423 Operator's Manual page 15

Neutral
TO GO FORWARD:
From neutral position, gently push both drive levers forward.
To increase speed, move levers farther forward.
TO GO BACKWARD:
From neutral position, gently pull both drive levers toward you.
TURNING:
Turning is controlled by moving one drive lever slightly forward or rearward of
the other.
To turn left, move left lever rearward of the right lever.
To turn "square corners" move lever of desired direction to neutral.
To turn on mower's own axis (zero turning radius) stop and move one lever to
reverse position and the other to forward position.
BRAKING:
To brake mower, move both levers in direction opposite of travel, release levers
to neutral, set parking brake.
THROTTLE CONTROL LEVER:
Located on control panel to operators right.
Throttle control for engine speed.
Choke for engine starting.
Throttle Control should be set to the MAXIMUM or wide open setting to insure
adequate cooling of the engine and to maintain mower deck blade speed while
mowing.
CONTROLS
Slow Forward Fast Forward 90° Right Turn
(Left turn opposite)
Slow Reverse
Page 15