Dixon ZTR 6000 SERIES Operator's Manual page 21

OPERATION INSTRUCTIONS
STARTING INSTRUCTIONS (engine has been operated):
1.
2.
3.
5.
6.
7.
Note:
CAUTION
Notes: On initial operation, set throttle at slow speed.
Operator must be seated in normal operating position.
Set parking brake.
Push throttle control lever to 1/4 to 1/2 setting.
Insert ignition key and turn to "start" position. When engine
starts, release ignition key. Key will return to "run" position.
Move throttle control lever to the wide open or maximum setting
for actual operation of the mower deck.
Note: Model 6023 may require partial choke setting to insure
adequate engagement of the mower deck. As engine
warms, open choke lever.
Engine must be operated at wide open or maximum setting to
insure adequate lubrication, cooling and cut quality of the mower
deck.
6000 Series mowers will require a slightly longer warm-up period
using partial choke settings.
Do not operate the engine in an enclosed area
due to the harmful exhaust gas produced.
Engine cannot be restarted when blades are engaged.
Safety switches stop engine when operator leaves seat while
mower blades are engaged.
Always turn engine off when leaving mower.
21