Parking Brake - Dixon ZTR 6000 SERIES Operator's Manual

PARKING BRAKE

The parking brake is designed to hold the
mower from moving and is not intended
for use in stopping the mower while it is
in motion.
TO SET PARKING BRAKE
The hand operated parking brake is located at the right
hand side of the mower.
To engage brake, pull rearward.
To release brake, move lever forward.
NOTE: Always set parking brake before dismounting.
HYDRO-GEAR DRIVE SYSTEM:
Allows the mower to turn on its own axis (zero turning
radius).
Each lever controls one side of the mower.
16
CONTROLS
CAUTION
Release parking brake before moving mower.
Engage parking brake
before starting engine.