Mower Blade Maintenance - Dixon ZTR 4500 series Operator's Manual

CARE AND MAINTENANCE

MOWER BLADE MAINTENANCE:

NOTE:
1. Safely raise front of mower.
2. Hold or block blade from turning.
3. Loosen blade nut and remove blade.
4. When replacing blade, tighten blade nut securely. Refer to diagram.
CAUTION
NOTE: Be sure blade is center on pilot before tightening nut to 60 ft. lbs. torque.
Page 24
Observe proper blade position prior to removal.
Wear heavy, thick gloves when holding onto mower blade, avoid the sharp
edge of the blade.