Wireless Setup Using Wcn (Windows Connect Now) - Canon Pixma MP560 Series Getting Started

Reference Information
Wireless Setup Using WCN (Windows Connect Now)
Set up a wireless connection
by using the
WCN (Windows Connect Now) function of
Windows Vista.
o e e
~ ~"~"'(;~''''''''
1':"->
.11>-'"
~--------
• Before setting up by using the WCN, establish
wireless communication between the computer
and the access point.
• Canon assumes no responsibility for any
damage or loss of data stored on your USB flash
drive regardless of the cause even within the
warranty period.
• If your USB flash drive cannot be attached to the
Direct Print Port of the machine, a commercial
extension cord (for USB flash drives) may be
required.
Operation may not pe guaranteed depending on
your USB flash drive.
• USB flash drives with security enabled may not
be used.
~--------
• The machine supports "WCN-UFD".
From the Start menu of
the Windows side, click
Network.
The Network folder opens.
Click Add a wireless device
on the menu.
The
Add a wireless device
to
the
network screen will be displayed.
Click I want to add a wireless device
or computer that is not on the list,
using a USB flash drive.